A 3D printing price calculator that reads your actual file
Generic cost calculators guess from weight. The NextDay3D quote tool slices your real file: it measures the volume, the footprint, the height, the support material needed and the material you pick, then prices all three speeds. Change the material, infill or quantity and the price updates in front of you. No account and no email address are needed to see it.
The price it shows is the price you pay. It is locked for 30 days, can be shared with whoever approves spending, and the ex-VAT breakdown is shown beside it for anyone raising a purchase order.
Open the calculatorWhat moves the price most
- Volume. Material and printer time scale with the amount of plastic. Hollowing or lowering infill cuts both.
- Height. Tall parts take more layers. Lying a part flat is often cheaper.
- Supports. Overhangs need support material that is printed and then removed by hand.
- Material. PLA and PETG are the cheapest. Carbon fibre nylon and PEEK are the dearest.
- Quantity. 10% off from 10 units, 15% from 50, 20% from 100, 30% from 250.
What 3D printing costs by part size: six real FDM orders
If you want an estimate before you upload, this table is the estimator. These are real single-part orders from 2026, chosen because each sits at the median price for its size band. Totals include £5.99 delivery and 20% VAT. The print price is what the tool calculated for the part before the £9.99 minimum.
| Part | Material | Volume | Print price ex VAT | Standard | Express | Next Day |
|---|---|---|---|---|---|---|
| Tag, 84 by 7 by 2 mm | PLA, solid | 1.5 cm³ | £0.58 | £19.18 | £19.60 | £20.02 |
| Clip, 107 by 50 by 14 mm | PLA, 20% infill | 9.1 cm³ | £3.15 | £19.18 | £21.44 | £23.71 |
| Bracket, 90 by 53 by 14 mm | PETG, 50% infill | 11.9 cm³ | £4.11 | £19.18 | £22.14 | £25.09 |
| Thin panel, 510 by 213 by 2 mm | PETG, solid | 21.2 cm³ | £8.88 | £19.18 | £25.57 | £31.97 |
| Plate, 333 by 110 by 4 mm | PLA, 20% infill | 101 cm³ | £17.66 | £28.38 | £41.10 | £53.81 |
| Enclosure, 220 by 161 by 75 mm | PETG, 50% infill | 278 cm³ | £41.36 | £56.82 | £86.60 | £116.38 |
| Tall housing, 486 by 219 by 189 mm | PLA, 20% infill | 848 cm³ | £84.72 | £108.85 | £169.85 | £230.84 |
How a 3D printing price is built, line by line
The bracket above, ordered next day, is £25.09. This is where every penny goes. The tool shows the same lines for your file.
Print price: £4.11
Printer time, material and setup for one PETG bracket at 50% infill. Calculated from the sliced file, not from a weight guess.
Minimum top-up: £5.88
The print price per material is raised to £9.99 because a bed and a person's time are used whatever the size. Order several parts in one material and this disappears.
Next Day uplift: £4.93
120% of the print price. It buys the front of the queue, a printer this afternoon and the post tonight. Express is 60%. Standard adds nothing.
Delivery and VAT: £5.99 and £4.18
Royal Mail tracked to any UK address, then 20% VAT on the lot. A VAT invoice comes with every order.
Resin and SLS nylon 3D printing prices
Resin (SLA) and SLS nylon PA12 are priced in the same tool from the same file. Resin is for fine detail and smooth surfaces; SLS is for production-grade nylon parts without supports. Resin can be ordered next day. SLS nylon is dispatched in 10 working days.
Print prices below are from real single-part orders at the median for their size. Delivery and VAT are added as for FDM, and the tool shows any resin setup fee or the £30 SLS minimum before you order.
| Part | Process | Volume | Print price ex VAT |
|---|---|---|---|
| Small fitting, 30 by 30 by 9 mm | Grey resin | 3.1 cm³ | £2.13 |
| Hand-sized part, 80 by 58 by 37 mm | Grey resin | 32 cm³ | £19.07 |
| Tall part, 260 by 58 by 58 mm | Tough resin | 154 cm³ | £88.33 |
| Thin bracket, 76 by 65 by 3 mm | SLS nylon PA12 | 8 cm³ | £1.44 |
| Flat plate, 161 by 136 by 2 mm | SLS nylon PA12 | 13 cm³ | £7.81 |
| Housing, 167 by 141 by 18 mm | SLS nylon PA12 | 212 cm³ | £37.45 |
Cheap 3D printing in the UK: how to pay the least here
NextDay3D is not built to be the cheapest place on the internet for one large part. It is built to be the quickest, with a minimum order of £9.99 that is the lowest we found among credible UK bureaus (most are £25 to £50). If affordable matters more than fast, these choices cut the bill without changing the part.
Choose Standard
No uplift. The bracket is £19.18 delivered instead of £25.09.
Put several parts in one order
The £9.99 minimum is per material, not per part. Three small PETG parts share one minimum and one delivery charge.
Order 10 or more
10% off from 10 units, 15% from 50. Ten brackets on Standard are £51.58, which is £5.16 each delivered.
Lower the infill, pick PLA or PETG
20% infill is strong enough for most housings and brackets, and PLA and PETG are the cheapest materials.
3D printing cost questions
How much does it cost to 3D print something in the UK?
At NextDay3D a small part costs £19.18 delivered on Standard speed, £20 to £25 delivered next day, and most orders are between £20 and £120 including VAT and delivery. A phone-sized PETG enclosure is £56.82 on Standard or £116.38 next day. The exact price for your file appears in about 20 seconds when you upload it.
How much does 3D printing cost per gram or per hour?
NextDay3D does not price by the gram or the hour, because two parts of the same weight can take very different times to print. Across real orders the print price works out at roughly 40p per cubic centimetre for small parts falling to about 10p per cubic centimetre for large ones, before the £9.99 minimum, delivery and VAT.
Why is there a minimum order?
Every part, however small, occupies a printer bed and a person's time to slice, remove, clean and pack. NextDay3D's minimum is £9.99 of print price per material, ex VAT, which is lower than the £25 to £50 minimums typical of UK bureaus. Ordering several parts in one material shares the minimum.
Is next-day 3D printing much more expensive?
The Next Day uplift at NextDay3D is 120% of the print price, which on small parts is a few pounds: the 90 mm PETG bracket is £19.18 on Standard and £25.09 next day, a difference of £5.91. On a large part the uplift grows with the print price, and the tool shows all three speeds so you can decide.
Do your prices include VAT and delivery?
Yes. Every price in the NextDay3D quote tool includes 20% VAT, and £5.99 Royal Mail tracked delivery is added as its own line for any UK address. The ex-VAT breakdown is shown beside the total and a VAT invoice is issued with every order.
Do you charge setup fees?
Not on FDM parts. Some resin orders carry a £30 setup fee, and SLS nylon has a £30 minimum order. Both are shown in the tool before you pay.
How do I get a 3D printing quote online in the UK?
Upload a STEP, STL, OBJ, 3MF or IGS file at nextday3d.co.uk. The price for Next Day, Express and Standard appears in about 20 seconds, with no account or email required. It stays locked for 30 days and can be shared with whoever approves the spend.
Where is the cheapest place to 3D print in the UK?
For a single small part delivered, the £9.99 minimum at NextDay3D makes it one of the cheapest options from a credible bureau: £19.18 delivered on Standard. For large single parts, industrial bureaus with bigger machines may be cheaper if you can wait 5 to 10 working days. Prices should be compared delivered and including VAT.